The Saving Advice Forums - A classic personal finance community.

Post Your Wins

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • disneysteve
    replied
    Originally posted by james.hendrickson View Post

    Um...the channel locks look fine to me. That said, I'm not a metalurgical expert. Is there a flaw in the metal I'm not seeing from the photo?
    I think rennigade was just saying that they look well-used. I'm sure mine look practically new in comparison but they don't get used very often.

    Good job fixing the blender. It's always so satisfying when you DIY something, even something as simple as tightening a screw, especially when it prevents you from having to replace something.

    Leave a comment:


  • james.hendrickson
    replied
    Originally posted by rennigade View Post

    That channel lock looks like it's been through war. Mine looks new compared to that and I use it all the time.

    If you're a homeowner and do not own a pair of channel lock pliers...do yourself a favor and rent.
    Um...the channel locks look fine to me. That said, I'm not a metalurgical expert. Is there a flaw in the metal I'm not seeing from the photo?

    Leave a comment:


  • rennigade
    replied
    Originally posted by QuarterMillionMan View Post
    Thought I needed to buy a new blender due to it not spinning. See that Phillips screw in the middle it was loose. Tightened it and viola, spins nicely again.

    Click image for larger version  Name:	blender.png Views:	17 Size:	418.5 KB ID:	736249
    That channel lock looks like it's been through war. Mine looks new compared to that and I use it all the time.

    If you're a homeowner and do not own a pair of channel lock pliers...do yourself a favor and rent.

    Leave a comment:


  • james.hendrickson
    replied
    Originally posted by QuarterMillionMan View Post
    Thought I needed to buy a new blender due to it not spinning. See that Phillips screw in the middle it was loose. Tightened it and viola, spins nicely again.

    Click image for larger version

Name:	blender.png
Views:	130
Size:	418.5 KB
ID:	736249
    What I love about this is you saved between $60 and $400 dollars by not having to buy a new blender.

    Leave a comment:


  • QuarterMillionMan
    replied
    Thought I needed to buy a new blender due to it not spinning. See that Phillips screw in the middle it was loose. Tightened it and viola, spins nicely again.

    Click image for larger version

Name:	blender.png
Views:	130
Size:	418.5 KB
ID:	736249

    Leave a comment:


  • QuarterMillionMan
    replied
    $1200 is the amount the casino will issue a W2-G.

    Leave a comment:


  • disneysteve
    replied
    Originally posted by kork13 View Post
    Aren't gambling winnings taxable on an annual basis? Or does the sizeable hand just mean that above the given amount the casino will withhold & report your winnings?
    As with many things, below a certain amount it is your responsibility to report the winnings. If you cross the threshold and the casino reports them, you do get to deduct any losses to offset the wins. Since regular gamblers are rarely ahead over time, taxes are usually minimal unless someone got lucky and hit a big jackpot.

    Personally, I’ve only had to report gambling winnings one year but I had losses to largely offset the winnings.

    Leave a comment:


  • kork13
    replied
    Originally posted by QuarterMillionMan View Post
    If only the kicker appeared it would have paid $2000, which would have been a taxable hand pay but I would have gladly paid the $500 tax and profited $1500.
    Aren't gambling winnings taxable on an annual basis? Or does the sizeable hand just mean that above the given amount the casino will withhold & report your winnings?

    Leave a comment:


  • QuarterMillionMan
    replied
    Got this $400 win yesterday, which I'll use for 1/2 of a new iPhone 14 plus for $899. If only the kicker appeared it would have paid $2000, which would have been a taxable hand pay but I would have gladly paid the $500 tax and profited $1500. Also, note this game has three possible 4000 credit pay outs.

    Click image for larger version

Name:	400.png
Views:	136
Size:	518.9 KB
ID:	736204

    Leave a comment:


  • scfr
    replied
    Originally posted by kork13 View Post
    This probably sounds silly, but we absolutely LOVE the Grocery Outlet that recently (last year) opened in our small town. Yeah, the selection varies alot, sand very few name-brand items, but it's all generally good quality, and prices are often mind-bogglingly awesome (50% or more less than regular stores or even Costco/Walmart prices. Consistent $1-$2 pints & $4 quarts+ of great I've cream (even top-quality/name brand stuff -- Tillamook, Ben & Jerry, etc.) is an indulgence that we treasure.
    Not silly at all - I totally get it!
    I took a trip in August and my hotel had a kitchenette and was right next to an Aldi's . . . I was excited to finally get to shop Aldi's and see what the big deal is.

    P.S. - When we travel overseas, we always visit grocery stores.
    Last edited by scfr; 10-08-2022, 01:54 PM.

    Leave a comment:


  • jenn_jenn
    replied
    Originally posted by james.hendrickson View Post

    Way to go UA Guy. I think what makes this possible is you know about engines - not everyone does, so they have to take the dealerships word for it.
    Agreed! Nice job, ua_guy!!

    I am absolutely ignorant when it comes to cars and dread taking my car in for services bc I am that sucker you referenced that just takes the dealership’s word.

    Knowing how to do basic car stuff is such a valuable skill!

    Leave a comment:


  • james.hendrickson
    replied
    Originally posted by ua_guy View Post
    I have an older Jeep and it needs things like coolant flushes and brake system flushes every 5 years. I'm happy to take it to the dealer for those things, and it's a long story why I choose a dealer over an indie shop. So those things cost money. While it was in for service recently, the shop said it should also have a fuel injector service ($185), the throttle body should be cleaned ($149), and both differentials should have a fluid service and inspection ($285 x2). I said thank you so much, but no, just do the service I asked for and I'll take care of the rest.

    The injector service...no joke...involves dumping a bottle of "fuel system cleaner" into the gas tank. The injectors are fine, by the way. When they have problems, THEN, they need to be pulled and properly cleaned. It's not time yet.

    The throttle body did need to be cleaned. They pick up dirt from the intake and oil from the plenum. A $7 can of "throttle body cleaner" (aka solvent) and a rag cleaned it right up. Took 15 minutes to pull it off and complete the service. Saved $178.

    I swapped the differential oil (super easy to do as my differentials have both drain and fill plugs. The gear oil cost me $60 for 4 quarts of good stuff, and 1/2 hour of my time. Saved $510. The "inspection" would involve removing the cover (10 minutes, a $3.28 gasket, and a big mess), but I didn't deem that medically necessary because the oil came out dark, but not dirty, and with no metal debris. So saved some time as well.
    Way to go UA Guy. I think what makes this possible is you know about engines - not everyone does, so they have to take the dealerships word for it.

    Leave a comment:


  • ua_guy
    replied
    I have an older Jeep and it needs things like coolant flushes and brake system flushes every 5 years. I'm happy to take it to the dealer for those things, and it's a long story why I choose a dealer over an indie shop. So those things cost money. While it was in for service recently, the shop said it should also have a fuel injector service ($185), the throttle body should be cleaned ($149), and both differentials should have a fluid service and inspection ($285 x2). I said thank you so much, but no, just do the service I asked for and I'll take care of the rest.

    The injector service...no joke...involves dumping a bottle of "fuel system cleaner" into the gas tank. The injectors are fine, by the way. When they have problems, THEN, they need to be pulled and properly cleaned. It's not time yet.

    The throttle body did need to be cleaned. They pick up dirt from the intake and oil from the plenum. A $7 can of "throttle body cleaner" (aka solvent) and a rag cleaned it right up. Took 15 minutes to pull it off and complete the service. Saved $178.

    I swapped the differential oil (super easy to do as my differentials have both drain and fill plugs. The gear oil cost me $60 for 4 quarts of good stuff, and 1/2 hour of my time. Saved $510. The "inspection" would involve removing the cover (10 minutes, a $3.28 gasket, and a big mess), but I didn't deem that medically necessary because the oil came out dark, but not dirty, and with no metal debris. So saved some time as well.

    Leave a comment:


  • kork13
    replied
    Originally posted by scfr View Post
    Got a 1 lb bag of really fresh local-ish Brussels sprouts at Grocery Outlet for $1.49 ... prepped and steamed them this morning.
    This probably sounds silly, but we absolutely LOVE the Grocery Outlet that recently (last year) opened in our small town. Yeah, the selection varies alot, sand very few name-brand items, but it's all generally good quality, and prices are often mind-bogglingly awesome (50% or more less than regular stores or even Costco/Walmart prices. Consistent $1-$2 pints & $4 quarts+ of great I've cream (even top-quality/name brand stuff -- Tillamook, Ben & Jerry, etc.) is an indulgence that we treasure.

    Leave a comment:


  • crazyliblady
    replied
    Originally posted by scfr View Post
    Got a 1 lb bag of really fresh local-ish Brussels sprouts at Grocery Outlet for $1.49 ... prepped and steamed them this morning.
    Nice! I love brussel sprouts, but I actually coat mine in olive oil and add garlic powder and some other herb, usually parsley or basil. Then, I arrange them on a baking that is topped with parchment paper and cook them at 375ish for about 30 minutes.

    Leave a comment:

Working...
X